Intense moistening machine MIU-3
3D
Intense moistening machine MIU-3 is designed to moisten grain (wheat) on mills before loading it on softening.
Product Description
Specifications
Аdvantages
Video/Photo
Additional Information
Описание
Описание
Олис
Олис
Intense moistening machine MIU-3 is a box inside which trapezium-shaped blades are installed on a shaft. Initial grain enters the machine through the receiving discharge outlet, is sprayed by water, then captured by the blades and intensively mixed. The blades are set at a certain angle, which helps to the movement of the product along the box. The angle of the blades can be adjusted by changing product feed rate and the degree of moistening.
Specifications
Выберите модель
| Model | MIU-3 |
| Productivity, t/h | up to 9 |
| Pre-installed electric power capacity, kW | 7,5 |
| Moisture increase per pass, % | 2 – 5 |
| Length, mm | 3 |
| Weight, kg | 394 |
| Consumption, l/h | до 250 |
| Tilt angle, ° | 23 |
| Box diameter, mm | 320 |
Footnotes: An additional water heater is required.
Аdvantages
- Lack of noise, vibration, as well as dynamic loads on building structures;
- Reliability provided by simplicity and low material consumption of the design;
- Bearing units, drives and electrical components only from European manufacturers with a high reputation;
- The body is made of stainless steel, which increases the service life of the product;
- MIU-3 can be equipped with a system for automatically maintaining the set grain moisture content at the outlet. Manufacture of the main elements of the rotor in the form of stacked blades guarantees their ease of replacement when worn and the ability to change the mixing speed due to the installation of adjustable blades at different angles in the working space.
Photos
Выберите модель
| Model | MIU-3 |
| Productivity, t/h | up to 9 |
| Pre-installed electric power capacity, kW | 7,5 |
| Moisture increase per pass, % | 2 – 5 |
| Length, mm | 3 |
| Weight, kg | 394 |
| Consumption, l/h | до 250 |
| Tilt angle, ° | 23 |
| Box diameter, mm | 320 |
Footnotes: An additional water heater is required.
- Lack of noise, vibration, as well as dynamic loads on building structures;
- Reliability provided by simplicity and low material consumption of the design;
- Bearing units, drives and electrical components only from European manufacturers with a high reputation;
- The body is made of stainless steel, which increases the service life of the product;
- MIU-3 can be equipped with a system for automatically maintaining the set grain moisture content at the outlet. Manufacture of the main elements of the rotor in the form of stacked blades guarantees their ease of replacement when worn and the ability to change the mixing speed due to the installation of adjustable blades at different angles in the working space.
Photos
X