Destoners OMP-3,0

Destoners OMP-3

manufactured by OLIS Ltd are used for effective separation of mineral impurities from grain flows at grain enterprises.

The destoner works as follows: under the combined influence of the vibrations of the sorting surface and the air flow, grain is loosened, while the coefficient of internal friction decreases, and the grain mixture enters a state of fluidization. In the presence of an aerating effect, the fluidized layer of grain, which is practically not prone to the transport of the deck, flows as a “liquid” down the slope and is unloaded in the lower, wide part of the deck. Heavy mineral particles, which are in the lower layer and have the greatest adhesion to the rough sorting surface, are transported up against the inclination of the deck and are discharged through the upper narrowed part.

Аdvantages

1. Improved air regulation;
2. A specially designed deck with an increased coefficient of friction;
3. A specially designed deck with an increased coefficient of friction;
4. Increased machine efficiency;
5. Reduction of air consumption for aspiration by almost 2 times compared to analogues;
6. Exceptional separation efficiency;
7. Ensuring the separation of at least 99 % of mineral impurities;
8. Components produced by leading European manufacturers;
9. High technological efficiency;
10. Reliable design.

Photos

• 
• 
• 

1. Improved air regulation;
2. A specially designed deck with an increased coefficient of friction;
3. A specially designed deck with an increased coefficient of friction;
4. Increased machine efficiency;
5. Reduction of air consumption for aspiration by almost 2 times compared to analogues;
6. Exceptional separation efficiency;
7. Ensuring the separation of at least 99 % of mineral impurities;
8. Components produced by leading European manufacturers;
9. High technological efficiency;
10. Reliable design.

Photos

• 
• 
•